Wing is built with 1\/4\u2033 leading and trailing edge sticks, with no notches.<\/p>\n
3 degrees of dihedral at each tip. \u00a0Place one wing flat on the table and raise the other tip 2.75\u2033.<\/p>\n
Kit includes parts for bolt on wings. \u00a0There\u2019s a 1\/4\u2033 ply anchor plate for the fuselage, and a 1\/16\u2033 ply plate for the trailing edge of the wing.<\/p>\n
I\u2019m assuming that the average builder will choose to use a nylon engine mount, so this short kit does not include parts to build the wooden mount shown on the plan. \u00a0And don\u2019t forget that you\u2019ll need to build your own cowl<\/p>\n","protected":false},"excerpt":{"rendered":"
Wing is built with 1\/4\u2033 leading and trailing edge sticks, with no notches. 3 degrees of dihedral at each tip. \u00a0Place one wing flat on the table and raise the other tip 2.75\u2033. Kit includes parts for bolt on wings. … Continue reading