There are two versions of the Super Sportster 60 plan floating around on the internet. \u00a0One of them is scanned from the plan that came with the Great Planes kit, and the other is a modern CAD drawing. \u00a0Sharp eyed observers will notice that these two plans are not the same size. \u00a0My kit is designed from the Great Planes scan, not the CAD drawing. \u00a0If you build it, it will be the same size as a plane built from the original kit. \u00a0If you have a plane that was built from the Great Planes kit and it needs\u00a0a new set of wing ribs or some other single part, my parts will match.<\/p>\n
When you build my kit, don\u2019t print the CAD drawing.\u00a0 Go to the Super Sportster 60 page<\/a> on Outerzone and download the one that says “Plan File”.<\/p>\n I\u2019ve learned from a customer that the Great Planes Extra 300SP cowl is a pretty good fit for this plane. \u00a0That\u2019s part number GPMA 3222. \u00a0It looks like a good fit to me, and I\u2019m certainly excited about the OS 61 FX on the front.\u00a0 He also tried a Great Planes Escapade 61 Canopy, as shown in the third photo. Thanks to Guadalupe Talamantez for the photos.<\/p>\n","protected":false},"excerpt":{"rendered":" There are two versions of the Super Sportster 60 plan floating around on the internet. \u00a0One of them is scanned from the plan that came with the Great Planes kit, and the other is a modern CAD drawing. \u00a0Sharp eyed … Continue reading