My laser cutter doesn\u2019t like 3\/16 ply because it\u2019s too thick and dense. \u00a0So the 3\/16 ply pieces called for on the plan are replaced with more easily cut material. \u00a0The trailing edge dihedral brace is 1\/16 ply, which seems appropriate for this design, and the firewall and chin plate are 1\/8 ply, with the firewall cut twice to be laminated by the builder to a 1\/4 inch thickness if desired.<\/p>\n","protected":false},"excerpt":{"rendered":"
My laser cutter doesn\u2019t like 3\/16 ply because it\u2019s too thick and dense. \u00a0So the 3\/16 ply pieces called for on the plan are replaced with more easily cut material. \u00a0The trailing edge dihedral brace is 1\/16 ply, which seems … Continue reading