Fred Reese design from RCM magazine designed for 10 to 15 engines.<\/p>\n
I’ve replaced a few of the 3\/32 ply parts with 1\/8 ply, just because it cuts better.\u00a0 No big deal.<\/p>\n
Tell me if you want ailerons, and I’ll supply ribs with 1\/4″ trimmed for the addition of a 1\/4″ balsa trailing edge stick.\u00a0 The 1″ trailing edge stock will be used for ailerons.\u00a0 Dihedral for the aileron model is 1″ at each tip.\u00a0 If you don’t specify, you will receive standard ribs for 3 channel.<\/p>\n","protected":false},"excerpt":{"rendered":"
Fred Reese design from RCM magazine designed for 10 to 15 engines. I’ve replaced a few of the 3\/32 ply parts with 1\/8 ply, just because it cuts better.\u00a0 No big deal. Tell me if you want ailerons, and I’ll … Continue reading