Description

Fred Reese design from RCM magazine designed for 10 to 15 engines.

I’ve replaced a few of the 3/32 ply parts with 1/8 ply, just because it cuts better.  No big deal.

Tell me if you want ailerons, and I’ll supply ribs with 1/4″ trimmed for the addition of a 1/4″ balsa trailing edge stick.  The 1″ trailing edge stock will be used for ailerons.  Dihedral for the aileron model is 1″ at each tip.  If you don’t specify, you will receive standard ribs for 3 channel.